Firestone RubberCover EPDM

The rubber solution for residential flat roofing


  • Comes with a Firestone Approved 20 Year Guarantee
  • Fully Adhered System : No Flame
  • Large seamless sheets
  • Fast and easy installation
  • Life expectancy up to 50 years
  • Little or no maintenance
  • Lightweight
  • Eco Friendly
  • Over m2 of references
  • From a world leader in rubber technology
  • Remains highly flexible even at temperatures down to -45 degreesC. The membrane can also elongate over 300% to accommodate building movements.

A Typical Installation

  1. Strip off the existing roof back to bare decking or overboard with new ply or OSB.
  2. Remove arris rails from any open edges and fix 2”x1! Timber batten to perimeter.
  3. Lay rubber in the correct position and allow to relax for 20 minutes.
  4. Fold one half of the membrane back and after stirring, roller apply water based adhesive to the deck. Repeat to other half of roof and sweep out any air bubbles.
  5. Stir contact adhesive and thinly apply to both rubber and upstand. Allow to dry then mate together.
  6. Use primer and 9” flashing tape to seal where the roof abuts the building.
  7. Fix plastisol steel trims to the roof perimeter and joiners using the colour coded caps.
  8. Cement point rear wall.
  9. Leave clean and tidy site.

Firestone EPDM Flat Roof Image

Before/After Example